Le SplashGard™ est un système de revêtement spécialisé conçu pour adhérer facilement à des surfaces en acier humide et empêcher la corrosion. Il est composé du revêtement SplashBond™ Adhesive et d’une enveloppe extérieure en fibre de verre Splash Wrap, imprégnée de résine d'uréthane (MCU) qui durcit à l'humidité. Le système SplashGard™ arrête non seulement la corrosion et lutte contre l'action des vagues, mais il apporte également un renforcement structurel, ce qui en fait une solution idéale pour une utilisation sur les canalisations et les piliers verticaux.
Mechanical Properties
Attribute Tensile Strength
Method ASTM D3039
Value 51,800 psi
Attribute Tensile Modulus
Method ASTM D3039
Value 3.01 x 106 psi
Attribute Poisson's Ratio
Method ASTM D3039
Value 0.077
Thermal Properties
Attribute Thermal Expansion
Method ASTM E831
Value 10.2 μm/m/°C
Attribute Heat Distortion Temperature
Method ASTM D648
Value 205 °C
Attribute Max Operating Temperature
Method ASME PCC-2
Value 185 °C
Attribute Application Temperature
Value -50°F to 120°F -46°C to 49°C
System Properties
Attribute Ply Thickness
Value 22 mils (0.022 inches)
Attribute Working Time
Value 20 – 30 minutes
Attribute Set Time
Value 2 hours
Attribute Cure Time
Value 24 hours
Attribute Shelf Life
Value 1 year with proper storage
Attribute Stocked Sizes
Value From 2" X 12' to 12" X 90'

1. Surface Preparation
Remove all soft coatings and media blast the pipe to provide an anchor pattern (NACE 1 preferred). On dry surfaces, wipe the surface with a solvent such as Acetone, Toluene, or MEK. For structural repairs, mix and apply filler putty or paste to any defects.
2. Apply SplashBond™
Mix equal parts of the SplashBond™ Epoxy Primer until uniform. Apply the primer to the pipe surface as instructed. Allow the primer to sit until a “peanut butter” thickness is achieved.
3. Apply SplashWrap™
Follow the wrapping instructions for Pipe Wrap™ or A+ Wrap™, as applicable for the repair.
4. Apply SplashBond™ Outer Coat
Allow the material to cure. Then, mix and apply a coating of SplashBond™ as an outer coating.